Portable power for cockpit devices - iFly Pictures & Feedback

iFly GPS Forum

We have a new Forum!  Go here to get started: https://adventurepilot.community.forum.  
The new forum is easier to use and much more capable than the old, we hope you will join our community! 

Below is a copy of the old forum. This will remain available for a short period so you can access and review the information contained here. To continue a conversation, or start a new one, please register and create a post at our new forum location.
HomeHomeDiscussionsDiscussionsiFly Pictures &...iFly Pictures &...Portable power for cockpit devicesPortable power for cockpit devices
Previous
 
Next
New Post
2/13/2015 10:42 PM
 

Cigarette lighters in old airplanes like mine were meant to light an occasional cigarette - not power iFly's, iPads, Androids, cell phones, etc. I wanted a seperate power supply available for the portable devices that I carry, just in case the primary power/nav systems go south. Additionally, I wanted the ability to jump in a friend's plane and power up my own GPS and ADS-B systems and maybe even charge a phone or two, even if there wasn't ship's power available. So I cobbled together the attached portable charging station, the size of a small ammo box (actually, it IS a small ammo box). Since the box can also be plugged into the ship to keep it "topped off" in flight, there is a Schottky diode on the charging side to prevent the box from energizing the panel when the master switch is off. Currently it contains a 12v 14Ah sealed battery, but a smaller, lighter 10Ah battery was enough to fly 9 hours while powering the ADS-B box without dropping below 12 volts. With the bigger battery, the whole thing probably weighs about 10 pounds and should power an iFly 720 and an ADS-B for several flights between charges. It's also been handy for motorcycle camping and a 12v source around the pool. With more pilots adding portable devices to the mix, I thought I'd share my portable power idea. The ink pen in the pictures is for a size reference.

The black switch in the middle/center controls power to the bottom two "main" outlets, as well as the 3-digit LED near the top that displays the battery voltage (12.8, 12.7, 12.6, etc). The 3rd outlet, beside the power switch, is always hot and contains a 2-port USB charger for phones, etc. The red switch controls the vertical LED light strips that are on the edges. These lights are a great help when loading/unloading the plane at night. The charging port is near the top, to the side of the voltage display.


Jeff Nokomis Clark, Mooney M20G, iFly app on ASUS ZenPad Z8s, ASUS ZenFone AR, ASUS Windows 10 tablet, Stratux ADS-B w AHRS
 
 PowerPorts2.jpg
New Post
7/20/2015 9:48 AM
 

Awesome idea you might post a how-to on building one.

 
New Post
7/27/2015 6:35 PM
 

Another possible portable power supply is the DeWalt battery adapter for their heated jackets. I don't have one, so I can't verify anything, but it looks like the DCB090, perhaps the number is DCB091. At any rate the difference between the two is the one for the jacket has a power recepticle where the jacket plugs in. If that puts out 12vdc or better it seems it could power the iFly, and a couple USB powered devices. I saw one at the local DeWalt store, the clerk tried to look up the device, but it's apparently only available with the jackets.

So, if anyone has the jacket and can confirm what the voltage of the output to the jacket is...

 
New Post
8/17/2015 4:13 PM
 

Thanks Eric. I plan to make another one soon and I'll document it. Oddly enough, I've had practically no interest from my flying friends, but others (athletic trainers & coaches stuck in a dugout all day; backseat travellers in a crowded van, tent campers) all want one. I built it to simultaneously power my iFly and ADS-B, but with 15ah of 12v juice it is very versatile.


Jeff Nokomis Clark, Mooney M20G, iFly app on ASUS ZenPad Z8s, ASUS ZenFone AR, ASUS Windows 10 tablet, Stratux ADS-B w AHRS
 
New Post
9/13/2015 4:21 PM
 
I know it's not exactly what you are looking for as mine is a permanent installation, but....

I installed a 28v DC to 14v DC converter in my plane and added a 14V lighter outlet and 2 USB charging ports. They are dash mounted so I can run the iFly from the 14V outlet and charge phones and tablets etc... with the USB ports.

I still have the 24V factory outlet as well.

Total cost was ~$250 with TSO'd parts. Install time was maybe 2hrs.

Mike
 
Previous
 
Next
HomeHomeDiscussionsDiscussionsiFly Pictures &...iFly Pictures &...Portable power for cockpit devicesPortable power for cockpit devices