Waypoint & Final Boxes - iFly Wish-List - iFly EFB

iFly GPS Forum

We have a new Forum!  Go here to get started: https://adventurepilot.community.forum.  
The new forum is easier to use and much more capable than the old, we hope you will join our community! 

Below is a copy of the old forum. This will remain available for a short period so you can access and review the information contained here. To continue a conversation, or start a new one, please register and create a post at our new forum location.
HomeHomeDiscussionsDiscussionsiFly Wish-ListiFly Wish-ListWaypoint & Final BoxesWaypoint & Final Boxes
Previous
 
Next
New Post
11/8/2011 7:08 AM
 
Ron S.
No Ranking


Ron S.'s Avatar

Joined: 10/10/2011
Posts: 22

I like to have both the waypoint and final destination boxes (identifier, distance, time, eta) displayed on a multi-leg flight. However, would it be possible to have the waypoint boxes not display when on the last leg (waypoint airport ID = final airport ID)? Just like when flying a one-leg flight the waypoint boxes do not display, why do they need to display when the waypoint IS the final?
 
New Post
11/8/2011 11:29 AM
 
citabriabob
10th Level Poster


Joined: 4/14/2010
Posts: 156

Piling on: Would it be possible to put the identifiers (JFK, 33NY, etc.) on those waypoint/final destination boxes?

Robert Szego
Bellanca-Champion Club http://www.bellanca-championclub.com
Aeronca Aviators Club http://www.aeronca.org
 
New Post
11/8/2011 11:31 AM
 
Ron S.
No Ranking


Ron S.'s Avatar

Joined: 10/10/2011
Posts: 22
citabriabob wrote:

Piling on: Would it be possible to put the identifiers (JFK, 33NY, etc.) on those waypoint/final destination boxes?

Those items can already be added onto the screen from the setup. I have them on mine. Airport identifier, distance, time, eta.
 
New Post
11/9/2011 8:19 PM
 
PA-22
6th Level Poster


PA-22's Avatar

PA-22's Avatar

Joined: 2/16/2011
Posts: 501

rjs:

Here's what I did to solve the issue of repetitive boxes when waypoint name/ETE/dist. = final destination name/ETE/dist. I created two sets of instrument configurations: "Direct" and "Waypoints." The "Direct" set of instruments does not include the waypoint name or dist. or ETE, etc. boxes, whereas the "Waypoints" set of instruments shows both waypoints and final destination information boxes. So when I am flying a multi-leg flight plan that has waypoints I use the "Waypoints" set of instruments until I pass the final waypoint, then I just tap any of the instrument boxes and the display switches to the "Direct" set that shows only the destination info for the final leg. By the way, I set up the "BASIC" instrument group identical to the "Direct" configuration and the "EXTENDED" group is identical to the "Waypoints" configuration. ---Ralph
 
New Post
11/10/2011 7:17 AM
 
Ron S.
No Ranking


Ron S.'s Avatar

Joined: 10/10/2011
Posts: 22

Thanks for the tip, Ralph. I'll have to give that a try.

Ron
 
 Page 1 of 1
Previous
 
Next
HomeHomeDiscussionsDiscussionsiFly Wish-ListiFly Wish-ListWaypoint & Final BoxesWaypoint & Final Boxes


Adventure Pilot LLC

1476 Industrial Blvd McKinney, TX 75069
info@iflyefb.com
M-F: 10:00am - 5:00pm CT
(214) 585-0444

© 2023 by Adventure Pilot : Terms Of Use : Privacy Statement