Mount Style - iFly General Discussions

We have a new Forum! Go here to get started: https://adventurepilot.community.forum.
The new forum is easier to use and much more capable than the old, we hope you will join our community!

Below is a copy of the old forum. This will remain available for a short period so you can access and review the information contained here. To continue a conversation, or start a new one, please register and create a post at our new forum location.

Search

Home

Discussions

iFly General Di...

Mount Style

12/17/2012 9:38 PM

Kyle Boatright

Joined: 12/17/2012

Posts: 1

Mount Style

Is there an industry term for the "T" bolt recess on the back of the iFly?

Neither the supplied mount, the RAM mount, or the AirGizmo really do what I want, so I'd like to scour the internet to see what, if any, other options are available before I start homebrewing something.

12/18/2012 10:59 AM

Shane

Joined: 4/21/2010

Posts: 1709

Re: Mount Style

The term our factory uses is a "Cradle Hole". We also use "Keyhole Slot". Maybe this will help.

Shane Woodson
Vice President | Adventure Pilot LLC.

1/7/2013 5:31 PM

Sam Buchanan

Joined: 11/23/2012

Posts: 8

Re: Mount Style

Kyle,

I have a "custom" mount for the 700 in my RV-6. I just took a pan-head bolt and ground the head until it was a snug fit in the recess. Only took few minutes at the bench grinder and works like a charm.

Page 1 of 1

iFly GPS Forum

Adventure Pilot LLC