MGL engine monitor integration RDAC - iFly General Discussions

iFly GPS Forum

We have a new Forum!  Go here to get started: https://adventurepilot.community.forum.  
The new forum is easier to use and much more capable than the old, we hope you will join our community! 

Below is a copy of the old forum. This will remain available for a short period so you can access and review the information contained here. To continue a conversation, or start a new one, please register and create a post at our new forum location.
HomeHomeDiscussionsDiscussionsiFly General Di...iFly General Di...MGL engine monitor integration RDACMGL engine monitor integration RDAC
Previous
 
Next
New Post
2/14/2022 11:58 PM
 

Levil3 

will this integrate with MGL RDAC ?

Also I have a stratux unit but AHRS seems to have issues / I don't think I am the only one from the posts I see /is there a fix for this or is there an ADSB in with a reliable AHRS unit you recommend 

Thanks Mike

 
New Post
2/15/2022 7:46 AM
 

Hi, Mike.  I'm not sure what you're asking about.  This is an iFly GPS forum, but you seem to be asking if a Level3 ADSB device will integrate with an engine monitor.  Please help me understand:

1)  What sort of integration between an ADSB device and an engine monitor are you trying to accomplish?

2)  How would iFly GPS be involved in this integration?

 
New Post
2/16/2022 12:41 PM
 
Mccurdy Mike wrote:

Levil3 

will this integrate with MGL RDAC ?

Also I have a stratux unit but AHRS seems to have issues / I don't think I am the only one from the posts I see /is there a fix for this or is there an ADSB in with a reliable AHRS unit you recommend 

Thanks Mike

If MGL will interface with RS232 data, yes. 

stratux is garbage, i don't like them at all. 95% of all our support issues stem from stratux. they're very cheap and you get what you pay for. The Levil3 is a great option.

 
Previous
 
Next
HomeHomeDiscussionsDiscussionsiFly General Di...iFly General Di...MGL engine monitor integration RDACMGL engine monitor integration RDAC