ads-b GPS WAAS - iFly GPS for Android - iFly EFB

iFly GPS Forum

We have a new Forum!  Go here to get started: https://adventurepilot.community.forum.  
The new forum is easier to use and much more capable than the old, we hope you will join our community! 

Below is a copy of the old forum. This will remain available for a short period so you can access and review the information contained here. To continue a conversation, or start a new one, please register and create a post at our new forum location.
HomeHomeDiscussionsDiscussionsiFly GPS for An...iFly GPS for An...ads-b GPS WAASads-b GPS WAAS
Previous
 
Next
New Post
2/4/2017 8:02 PM
 

Using a stratux to feed 2 simultaneous tablets running iFly (my primary and backup.)

I am positive the GPS on the startux is WAAS capable and it is seeing the WAAS sats. I recall a "screen" that showed not only "GPS" when there is no WAAS, but "GPS WAAS" when there is. 9.8.4 is only showing the "GPS" string in the little window. Is this a change or is eomething wrong? The "GPS" little window is the same on both tablets.

Btw, I *like* the new "autodetect" for ADS-B IN devices.

 
New Post
2/4/2017 8:59 PM
 
The Stratux I have listed on Ebay is showing ADS-B as the GPS Status on both my iPad and iPhone. It definitely has a WAAS GPS attached. I don't remember if that changes when in the air or not.
 
New Post
2/5/2017 2:02 PM
 
Skypuppy you are correct that iFly does not show a WAAS lock for Stratux (it never has) like it does for other ADS-B's. This has been reported a few times and hopefully is making it up the list to be corrected.

Jeff Nokomis Clark, Mooney M20G, iFly app on ASUS ZenPad Z8s, ASUS ZenFone AR, ASUS Windows 10 tablet, Stratux ADS-B w AHRS
 
New Post
2/6/2017 12:00 PM
 

The standard position data we get from any ADS-B device does not include details about the signal strength. This data just isn't part of the GDL-90 protocol - so there is no standard way of getting this info.

Many devices include a message that has device-specific information, including details about the GPS signal. But every device is different. Stratux originally didn't include this data, so when we added Stratux support it didn't include signal strength or wass info. But the latest firmware has this, so it's on our todo list to get it parsed.

Thanks,
Walter


Walter Boyd
President, Adventure Pilot
 
New Post
2/6/2017 7:02 PM
 

And don't even get me started about the RAIM and other superfluous madness.

 
Previous
 
Next
HomeHomeDiscussionsDiscussionsiFly GPS for An...iFly GPS for An...ads-b GPS WAASads-b GPS WAAS