Synthetic Vision Requirements for IFLY

iFly GPS Forum

We have a new Forum!  Go here to get started: https://adventurepilot.community.forum.  
The new forum is easier to use and much more capable than the old, we hope you will join our community! 

Below is a copy of the old forum. This will remain available for a short period so you can access and review the information contained here. To continue a conversation, or start a new one, please register and create a post at our new forum location.
HomeHomeDiscussionsDiscussionsiFly General Di...iFly General Di...Synthetic Vision Requirements for IFLYSynthetic Vision Requirements for IFLY
Previous
 
Next
New Post
3/18/2018 5:02 PM
 

https://www.amazon.com/Stratux-Sensor...tux+ahrs+module

This is the AHRS module.  It sits on top of the 2 parallel rows of pins.  If you don't have one, get one.  It's only $15.  Also, don't get too carried away with AHRS.  It can get you killed if you try using it in zero visiablity.

When connected to the stratux.com WIFI network, using your browser, go to 192.168.10.1 and there you should be able to tell if you have the AHRS module.

 

 
New Post
3/18/2018 6:55 PM
 

Johnny,

1.  On the AHRS device: So, I will buy this...but is this something I can easily install MYSELF or do I need to find a person skilled in electronics or computers?

Does it just "press in" or is there some other way to affix it within the system? Are there clear directions?

I am wondering HOW MUCH BETTER the S.V. will be with the AHRS as it is pretty good right now.


 

2.  As to flying in IMC with this...not to worry, Johnny. I realize that at my age and what is behind me after flying privately and professionally since 1976, my LUCK BAG is now EMPTY but my JUDGMENT BAG is now FULL.  There is absolutely no reason for me to fly below terrain in valleys at night or in IMC anymore - did that in the Air Force when I had to - flying is just for fun now, so I stick to severe VMC, and most of that is in daytime CAVU!

Still, your advice is wise and should be heeded by all. This device ENHANCES SA, but should never be used as the PRIMARY means of navigation in terrain.  Thanks! 

 
New Post
3/18/2018 7:44 PM
 

You can install the AHRS module in 5 minutes.  Just plug it in and plug fan into it.  If the instructions don't show which pins to plug into, we can advise you.  I forgot but can find it.

EDIT:  This module will also give you pressure altitude, so you will want to put the pressure altitude instrument on your screen. 

 
New Post
3/18/2018 9:02 PM
 

Thanks! It's being shipped now.

Besides plugging it in, do I need to open the Stratux program and do any reconfiguration?

Will take it slowly...

Just wondering how much better this can get! 

Again, thanks. Mike 

 
New Post
3/18/2018 9:47 PM
 
Michael Marra wrote:

Thanks! It's being shipped now.

Besides plugging it in, do I need to open the Stratux program and do any reconfiguration?

Will take it slowly...

Just wondering how much better this can get! 

Again, thanks. Mike 

 

I don't remember, but if you do it's easy and we can walk you through it. You'll want to go to 192.168.10.1 to open the Stratux program and there you can see how to calibrate it, etc. If you need to update your firmware, that's easy also. You would simply download the latest file and install it using the Stratux program.
 
Previous
 
Next
HomeHomeDiscussionsDiscussionsiFly General Di...iFly General Di...Synthetic Vision Requirements for IFLYSynthetic Vision Requirements for IFLY