new mount IFLY position after adding Skyview

iFly GPS Forum

We have a new Forum!  Go here to get started: https://adventurepilot.community.forum.  
The new forum is easier to use and much more capable than the old, we hope you will join our community! 

Below is a copy of the old forum. This will remain available for a short period so you can access and review the information contained here. To continue a conversation, or start a new one, please register and create a post at our new forum location.
HomeHomeDiscussionsDiscussionsiFly Pictures &...iFly Pictures &...new mount IFLY position after adding Skyview new mount IFLY position after adding Skyview
Previous
 
Next
New Post
5/6/2010 7:00 PM
 
Flybuddy
No Ranking


Flybuddy's Avatar

Joined: 1/18/2010
Posts: 31

Just finished removing steam gauges and going glass. Mounted IFLY on right side of panel at about a 30 degree angle toward pilot. Hardwired to electrical system and also used remote gps antenna..This is an RV6..Tom
 
 RV6 Panel.jpg
New Post
7/6/2010 5:33 PM
 
Marc
No Ranking

Joined: 6/18/2010
Posts: 2

Hi Tom,

looks very nice. How is it attached to the panel?

Thanks,

Marc
 
New Post
8/3/2010 5:01 PM
 
Flybuddy
No Ranking


Flybuddy's Avatar

Joined: 1/18/2010
Posts: 31
Marc wrote:

Hi Tom,

looks very nice. How is it attached to the panel?

Thanks,

Marc

Velcro, I have two small holes behind unit for power and remote antenna
 
 Page 1 of 1
Previous
 
Next
HomeHomeDiscussionsDiscussionsiFly Pictures &...iFly Pictures &...new mount IFLY position after adding Skyview new mount IFLY position after adding Skyview


Adventure Pilot LLC

1476 Industrial Blvd McKinney, TX 75069
info@iflyefb.com
M-F: 10:00am - 5:00pm CT
(214) 585-0444

© 2023 by Adventure Pilot : Terms Of Use : Privacy Statement