Hard Wiring for Power - iFly Pictures & Feedback - iFly EFB

iFly GPS Forum

We have a new Forum!  Go here to get started: https://adventurepilot.community.forum.  
The new forum is easier to use and much more capable than the old, we hope you will join our community! 

Below is a copy of the old forum. This will remain available for a short period so you can access and review the information contained here. To continue a conversation, or start a new one, please register and create a post at our new forum location.
HomeHomeDiscussionsDiscussionsiFly Pictures &...iFly Pictures &...Hard Wiring for PowerHard Wiring for Power
Previous
 
Next
New Post
6/20/2010 12:38 PM
 

Hi Walter and forum contributors,

I have just ordered the ifly 700. I have an experimental AC and would like to hard wire to the aircraft power. I don't like the cable clutter of running power from a cigar lighter sockets etc. in fact I have none installed.

Questions:

1. Is it possible to purchase a bare power supply wire with just the unit side jack installed? or

2. Is this a generic plug available elsewhere as an off-the-shelf item?.

3. If I must adapt the supplied cord is there any circuitry buried in the cord that I need to be aware, and if so can you supply a schematic drawing?

 
New Post
6/21/2010 10:18 AM
 

Hi Tim,

I can sell extra AC or DC adapters for $12 plus shipping. These can be cut & hard wired, there is no circuitry. Generic plugs are not recommended. I will have these available through the store in a couple of days, or you can call 1-888-200-5129 to order right away.

Thanks,
Walter


Walter Boyd
President, Adventure Pilot
 
New Post
1/11/2011 5:21 PM
 

Walter,

I don't see any plugs on website and Scott is not aware of any. Why do you suggest not using a generic D.C. plug? Radio Shack p/n 274-1571 ($2.99 for 2) seems to be an exact match, although it's not an angle plug.

Thanks for a great product,

Don

 
New Post
1/17/2011 9:47 AM
 

I was referring to the AC/DC plugs being available on the store...which they are now. We don't plan on selling a hard-wire specific plug.

3rd party plugs may seem to fit fine, but there are slight variations on the interior and exterior dimensions and length that can cause a flaky connection, or it could be too tight and damage the plug. So it's much easier for us to simply recommend you use one of our adapters.

-Walter


Walter Boyd
President, Adventure Pilot
 
Previous
 
Next
HomeHomeDiscussionsDiscussionsiFly Pictures &...iFly Pictures &...Hard Wiring for PowerHard Wiring for Power