Heading Tape Transparance - iFly Pictures & Feedback - iFly EFB

iFly GPS Forum

We have a new Forum!  Go here to get started: https://adventurepilot.community.forum.  
The new forum is easier to use and much more capable than the old, we hope you will join our community! 

Below is a copy of the old forum. This will remain available for a short period so you can access and review the information contained here. To continue a conversation, or start a new one, please register and create a post at our new forum location.
HomeHomeDiscussionsDiscussionsiFly Pictures &...iFly Pictures &...Heading Tape TransparanceHeading Tape Transparance
Previous
 
Next
New Post
9/8/2013 10:55 AM
 
I noticed this a couple of flights back -- when the heading tape get switched to semi-transparent? I preferred the solid white background for this feature. The current configuration is difficult to read in the sectional mode, and this is my primary heading reference on VFR cross country flights. This instrument is so short that the minimal loss of map display is pretty small.

Don
 
New Post
9/8/2013 12:24 PM
 

Don,

Try using the Customize instruments option in the Setup to change the color(transparency) and you can even change the size so it's taller too. Customize Instruments is detailed in the owners manual too .


Shane Woodson
Vice President | Adventure Pilot LLC.
 
New Post
9/8/2013 3:52 PM
 
Don: And don't forget that in addition to Shane's excellent advice above, you will need to change the transparancy of the tape and save it for every instrument setup you have, not just on one page. I, too, think that tape is one of the most useful features on the iFly GPS. ===Ralph
 
Previous
 
Next
HomeHomeDiscussionsDiscussionsiFly Pictures &...iFly Pictures &...Heading Tape TransparanceHeading Tape Transparance