NMEA serial port Baud rate (Founded, got to select CUSTOM)

iFly GPS Forum

We have a new Forum!  Go here to get started: https://adventurepilot.community.forum.  
The new forum is easier to use and much more capable than the old, we hope you will join our community! 

Below is a copy of the old forum. This will remain available for a short period so you can access and review the information contained here. To continue a conversation, or start a new one, please register and create a post at our new forum location.
HomeHomeDiscussionsDiscussionsiFly Owners Q&AiFly Owners Q&ANMEA serial port Baud rate (Founded, got to select CUSTOM)NMEA serial port Baud rate (Founded, got to select CUSTOM)
Previous
 
Next
New Post
2/20/2021 1:43 PM
 
Royerm
No Ranking


Royerm's Avatar

Joined: 7/24/2019
Posts: 73

Hi all..

Trying to connect my TRIO Ap which needs 4800 Baud.

I'm seeing my NMEA controller and sentences are sent at 9600, must be a default.

Anyhow,, If I select serial port I'm not seeing anything just an empty box shows up,, no port or any baud rate selection???.

 

Regards
 
New Post
2/20/2021 6:31 PM
 
N854HC
No Ranking


Joined: 2/8/2019
Posts: 77

My Trio accepts the 9600 baud just fine. It states such in the newest manual (although hard to find) and I verified via phone call when I was setting mine up.

Best,

John
 
New Post
2/20/2021 8:49 PM
 
Royerm
No Ranking


Royerm's Avatar

Joined: 7/24/2019
Posts: 73

4800 or 9600 i'm still seeing NOGPS as opposed to FLTPLAN?????

I'm sure I saw it at some point, I must be missing something obvious again...

Regards
 
New Post
2/23/2021 3:28 PM
 
Brolin McKay
4th Level Poster


Joined: 10/6/2019
Posts: 772

Easiest way to test it is to go set up a flight plan, then auto-fly it with everything plugged in. 

Then go to menu/about/connected devices. Should show NMEA output controller. That will show you're connected.

Then, go to menu/setup/NMEA Output to edit settings there!
 
New Post
2/23/2021 3:36 PM
 
Royerm
No Ranking


Royerm's Avatar

Joined: 7/24/2019
Posts: 73

Thx Brolin,,,,  I had that and seeing the controller. I was using the ground on Pin 6 instead if Pin5.

All is good now.  Cheers

Hope you are OK with the weather you're getting.
 
 Page 1 of 1
Previous
 
Next
HomeHomeDiscussionsDiscussionsiFly Owners Q&AiFly Owners Q&ANMEA serial port Baud rate (Founded, got to select CUSTOM)NMEA serial port Baud rate (Founded, got to select CUSTOM)


Adventure Pilot LLC

1476 Industrial Blvd McKinney, TX 75069
info@iflyefb.com
M-F: 10:00am - 5:00pm CT
(214) 585-0444

© 2023 by Adventure Pilot : Terms Of Use : Privacy Statement