Putting Airport Info COM radio frequencies into the NMEA stream

iFly GPS Forum

We have a new Forum!  Go here to get started: https://adventurepilot.community.forum.  
The new forum is easier to use and much more capable than the old, we hope you will join our community! 

Below is a copy of the old forum. This will remain available for a short period so you can access and review the information contained here. To continue a conversation, or start a new one, please register and create a post at our new forum location.
HomeHomeDiscussionsDiscussionsiFly General Di...iFly General Di...Putting Airport Info COM radio frequencies into the NMEA stream Putting Airport Info COM radio frequencies into the NMEA stream
Previous
 
Next
New Post
2/28/2020 2:53 PM
 
Brian Manlove
No Ranking


Joined: 8/28/2018
Posts: 3

I would like to replace my Garmin 396 with my iFly tablet.  The one feature my Garmin has that I wish was in iFly is that they put COM radio frequencies out in their NMEA output, in either SL30 or SL40 compatible format.  This works great with my MGL V16, as it is a simple serial data in, the MGL will set the standby frequency.  It seems to me it would be a great feature if the frequency fields on the Airport Info screen were "clickable" and did the same thing... 

Love iFly,  it's the best!!

Brian Manlove
 
 Page 1 of 1
Previous
 
Next
HomeHomeDiscussionsDiscussionsiFly General Di...iFly General Di...Putting Airport Info COM radio frequencies into the NMEA stream Putting Airport Info COM radio frequencies into the NMEA stream


Adventure Pilot LLC

1476 Industrial Blvd McKinney, TX 75069
info@iflyefb.com
M-F: 10:00am - 5:00pm CT
(214) 585-0444

© 2023 by Adventure Pilot : Terms Of Use : Privacy Statement