Using Configuration and Monitor with Uavionix ADSB and IFLY

iFly GPS Forum

We have a new Forum!  Go here to get started: https://adventurepilot.community.forum.  
The new forum is easier to use and much more capable than the old, we hope you will join our community! 

Below is a copy of the old forum. This will remain available for a short period so you can access and review the information contained here. To continue a conversation, or start a new one, please register and create a post at our new forum location.
HomeHomeDiscussionsDiscussionsiFly General Di...iFly General Di...Using Configuration and Monitor with Uavionix ADSB and IFLYUsing Configuration and Monitor with Uavionix ADSB and IFLY
Previous
 
Next
New Post
12/26/2017 9:40 AM
 

My ECHO Uavonix adsb is working very well and I have a clean Bill of health from the FAA test I ran. Of course, I had a pass when I ran the PAPR wuth Navworx also so don't know what this proves.

Here is a tip for anyone using the ECHO set up app.

Set up of the ECHO ADSB is simple using the ECHO app I got from play store.

However, I found that I could not use it while in flight...or on the ground when IFLY is on.

Found out from Uavionix that when you have IFLY on it will not let anything else access the WiFI on your phone or tablet.

Not a big problem, but nice to know to prevent unnecessary troubleshooting.

 

John

 

 

 
Previous
 
Next
HomeHomeDiscussionsDiscussionsiFly General Di...iFly General Di...Using Configuration and Monitor with Uavionix ADSB and IFLYUsing Configuration and Monitor with Uavionix ADSB and IFLY