Hide course line? - iFly GPS for Android - iFly EFB

iFly GPS Forum

We have a new Forum!  Go here to get started: https://adventurepilot.community.forum.  
The new forum is easier to use and much more capable than the old, we hope you will join our community! 

Below is a copy of the old forum. This will remain available for a short period so you can access and review the information contained here. To continue a conversation, or start a new one, please register and create a post at our new forum location.
HomeHomeDiscussionsDiscussionsiFly GPS for An...iFly GPS for An...Hide course line?Hide course line?
Previous
 
Next
New Post
4/19/2015 7:42 PM
 
Greetings.
Is there someway of hiding the course line when the approach plate is being viewed? I find that the magenta line hides some (important) information.
Thanks,
Charlie
 
New Post
4/19/2015 9:13 PM
 

Tap and hold on the screen, which reduces your route line to a single-wide thin line, so that you can see all details.

As 98%+ of the info you need should already be visible, the frequency of needing to tap/hold the screen is usually minimized, making this an acceptable solution for most, it seems.


Brian Knox, Sr Software Engineer
 
New Post
4/22/2015 11:56 AM
 

I'll chime in in agreement with Charlie. I also find that important data is obscured. I'm putting together a list of suggestions and course line opacity is near the top. The tap and hold method, leaving a narrow line is OK, but I would prefer to be able to adjust the opacity via a setting. This would allow me to read information under the line without touching. Airway numbers, course headings, etc. are obscured by the course line. I would suggest a opacity setting (maybe limited to >=20% or something) with no solid opaque component. Then leave the single-wide line during a tap.

My two cents anyway.

Jim

 
Previous
 
Next
HomeHomeDiscussionsDiscussionsiFly GPS for An...iFly GPS for An...Hide course line?Hide course line?